Go to  Advanced Search

The biomechanical effects of crank arm length on cycling mechanics

Show full item record

Files in this item

Files Size Format Description   View
ubc_2000-0583.pdf 4.828Mb Adobe Portable Document Format   View/Open
Title: The biomechanical effects of crank arm length on cycling mechanics
Author: Sprules, Erica Booth
Degree Master of Science - MSc
Program Human Kinetics
Copyright Date: 2000
Abstract: The hypothesis of the current investigation was that there existed a relationship between anthropometry (total leg length, thigh length and shank length) and the crank length permitting the lowest heart rate at a given work rate (optimum crank length). In order to understand the mechanisms governing this relationship, segmental energies, average effective forces and average linear velocities of the foot were calculated. Sixteen avid cyclists completed one ride at each of 6 randomly presented crank lengths (120 mm, 140 mm, 160 mm, 180 mm, 200 mm and 220 mm). Subjects rode at a power output that elicited a heart rate response of approximately 155 bpm while riding with 160 mm cranks and were required to maintain a constant cadence of 90 rpm. During each crank length condition, pedal forces and heart rate were measured and videotape was collected. A multiple regression revealed that neither the average effective force, nor the average resultant linear velocity of the foot predicted the heart rates elicited across all crank lengths. A repeated measures ANOVA showed that the lowest segmental energies occurred at the shortest crank length. Optimum crank length was calculated for each subject and a multiple regression revealed that 51% of the variance in optimum crank length could be predicted by the following equation: optimum crank length (mm) = (18.971 *shank length) - (7.438*total leg length) + 90.679. However, almost all subjects' optimum crank lengths were in the range of 120 mm to 160 mm; a grouping of cranks that elicited statistically similar physiological responses and that includes crank lengths very close to the industry standard of 170 mm. It was therefore the recommendation of the investigator that crank lengths need not be changed from the industry standard of 170 mm for individuals of various leg lengths as optimum crank lengths predicted from leg length measures do not differ significantly in terms of physiological responses from crank lengths very close to the current industry standard.
URI: http://hdl.handle.net/2429/10970
Series/Report no. UBC Retrospective Theses Digitization Project [http://www.library.ubc.ca/archives/retro_theses/]

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893