Go to  Advanced Search

A new continuum dynamic model for the analysis of extremely rapid landslide motion across complex 3D terrain

Show full item record

Files in this item

Files Size Format Description   View
ubc_2006-200445.pdf 32.84Mb Adobe Portable Document Format   View/Open
 
Title: A new continuum dynamic model for the analysis of extremely rapid landslide motion across complex 3D terrain
Author: McDougall, Scott
Degree Doctor of Philosophy - PhD
Program Geological Engineering
Copyright Date: 2006
Abstract: Runout analysis, the prediction of landslide motion and its effects, is an essential component of landslide risk assessment. A new continuum dynamic model has been developed for the runout analysis of extremely rapid, flow-like landslides, including rock avalanches, debris avalanches, debris flows and flow slides. The new model, DAN3D, is a 3D extension of the existing 2D model DAN. It uses a meshless, Lagrangian numerical method adapted from Smoothed Particle Hydrodynamics to discretize and solve the depth-averaged equations of motion for an "equivalent fluid", a hypothetical material governed by simple rheological relationships. The required rheological parameters, rather than measured, are calibrated through back-analysis of real landslide case studies. The key capabilities of the model include: 1) the ability to simulate motion across complex 3D terrain without the need to input a pre-defined path direction or width and without introducing problems due to mesh distortion; 2) the ability to simulate strain-dependent, non-hydrostatic, anisotropic internal stresses due to 3D deformation of material with internal shear strength; 3) the ability to simulate mass and momentum transfer due to entrainment of path material; 4) the ability to simulate variations in rheology along the path and within the landslide; and 5) efficient and simple operation. The model outputs the simulated spatial distribution of hazard intensity parameters, including flow velocity and depth, which are required for delineating the potential impact area, estimating the vulnerability of elements within this area and designing protective measures. It has been tested using both analytical and experimental methods, and its general behaviour has been demonstrated using a series of simple parametric analyses. The model has also been applied at full-scale to the simulation of a wide variety of landslide types. These back-analyses form the basis for a more thorough calibration, but some useful patterns have already emerged. This experience has been applied in practice to landslide runout prediction, although so far only in a parametric way. With continued back-analysis of real cases and the development of a probabilistic approach to forward-analysis, true landslide runout prediction, including quantification of uncertainty, should eventually be possible using the new model.
URI: http://hdl.handle.net/2429/18500
Series/Report no. UBC Retrospective Theses Digitization Project [http://www.library.ubc.ca/archives/retro_theses/]

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893