Go to  Advanced Search

The recovery of subsurface reflectivity and impedance structure from reflection seismograms

Show full item record

Files in this item

Files Size Format Description   View
UBC_1981_A6_7 S38.pdf 5.319Mb Adobe Portable Document Format   View/Open
 
Title: The recovery of subsurface reflectivity and impedance structure from reflection seismograms
Author: Scheuer, Tim Ellis
Degree Master of Science - MSc
Program Geophysics
Copyright Date: 1981
Subject Keywords Seismic reflection method; Acoustic impedance
Abstract: This thesis is concerned with the problem of estimating broadband acoustic impedance from normal incidence reflection seismograms. This topic is covered by following the linear inverse formalisms described by Parker (1977) and Oldenburg (1980). The measured seismogram is modelled as a convolution of subsurface reflectivity with a source wavelet. Then an appraisal of the seismogram is performed to obtain unique bandlimited reflectivity information. This bandlimited reflecitivity information is then utilized in two different construction algorithms which provide a broadband estimate of reflectivity; from which a broadband impedance function may be computed. The first construction method is a maximum entropy method which uses an autoregressive representation of a small portion of the reflectivity spectrum to predict spectral values outside that small portion. The second and most versatile construction method is the linear programming approach of Levy and Fullagar (1981) which utilizes the unique bandlimited spectral information obtained from an appraisal and provides a broadband reflectivity function which has a minimum 1( norm. Both methods have been tested on synthetic and real seismic data and have shown good success at recovering interpretable broadband impedance models. Errors in the data and the uniqueness of constructed reflectivity models play important roles in estimating the impedance function and in assessing its uniqueness. The Karhunen-Loeve transformation is discussed and applied on real data to stabilize the construction results in the presence of noise. The generally accepted idea that low frequency impedance information must be supplied from well log or velocity analyses because of the bandlimited nature of seismic data has been challenged. When accurate, bandlimited reflectivity information can be recovered from the seismic trace, then an interpretable, broadband impedance model may be recovered using the two construction algorithms presented in this thesis.
URI: http://hdl.handle.net/2429/22549
Series/Report no. UBC Retrospective Theses Digitization Project [http://www.library.ubc.ca/archives/retro_theses/]
Scholarly Level: Graduate

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893