Go to  Advanced Search

Application of microstructural engineering to the controlled cooling of steel wire rod

Show full item record

Files in this item

Files Size Format Description   View
UBC_1989_A1 C35.pdf 24.97Mb Adobe Portable Document Format   View/Open
 
Title: Application of microstructural engineering to the controlled cooling of steel wire rod
Author: Campbell, Peter Cameron
Degree Doctor of Philosophy - PhD
Program Materials Engineering
Copyright Date: 1989
Abstract: The concept of microstractural engineering has been applied to Stelmor cooling of steel wire rod. The Stelmor process is situated immediately following the rod mill and utilizes forced air to cool steel rod from the rolling temperature, through austenite transformation, down to a temperature suitable for handling. A mathematical model has been developed for the prediction of the mechanical properties of the steel rod as a function of cooling parameters in the process and steel composition. The model is based on one-dimensional heat conduction within the rod and is limited to plain-carbon eutectoid and hypoeutectoid steels. Phase transformation kinetics in the model, for both the austenite-ferrite and austenite-pearlite reactions, have been characterized through the use of the Avrami equation. A combination of experimental and literature data have been employed for the development of equations to quantitatively predict the microstructure formed in the steel rod after transformation. A modified Gladman equation was adopted for the strength predictions. Validation of the model has been achieved with controlled cooling experiments conducted in the laboratory. The experiments were designed to simulate the Stelmor process, involving a range of steel grades, rod diameters and air velocities. Thermal histories in steel rod samples during forced air cooling were acquired by mounting a thermocouple at the centreline of each rod. After cooling, the rod samples were subjected to microstructural examination and mechanical testing. Results from this investigation were utilized to develop relationships among steel composition, thermal history and ferrite fraction, ferrite grain diameter and pearlite interlamellar spacing. The laboratory data was also utilized to modify the strength predictions of the Gladman equation. In order to obtain information on cooling conditions in an industrial setting, a series of experiments has been conducted on an operating Stelmor line at the No. 2 Rod Mill of Stelco Hilton Works. The technique followed in the plant trials was similar to that employed in the laboratory and the thermal histories of the test rods allowed the mathematical model to be "tuned" to operating conditions. Mechanical properties for several industrial steel grades were also measured during the plant trials, and have been applied to test the predictive capability of the model. Comparisons of the model-predicted thermal histories, microstructures and mechanical properties with those measured in both the laboratory and plant tests have been made. The results of the thermal history comparison for both laboratory and plant conditions showed good agreement between the model-predicted and measured centreline temperatures of control-cooled steel rod. Predicted temperatures during the austenite-ferrite and austenite-pearlite phase transformations were within the expected error associated with prediction of transformation kinetics. Good agreement was obtained between model-predicted and measured ferrite fraction, ferrite grain diameter and interlamellar pearlite spacing. Yield strengths and ultimate tensile strengths predicted by the model for the laboratory and plant tests displayed excellent agreement with measured strengths. In order to obtain a test of the predictive capability of the model under Stelmor line conditions, an independent set of ultimate tensile strengths for Stelmor-cooled steel grades was obtained. These samples were taken directly from grades being processed on the line. A comparison between model-predicted and measured UTS for these grades yielded excellent agreement in the 1020-1040 and eutectoid composition range, with a fair prediction obtained for 1055-1065 grades.
URI: http://hdl.handle.net/2429/29065
Series/Report no. UBC Retrospective Theses Digitization Project [http://www.library.ubc.ca/archives/retro_theses/]
Scholarly Level: Graduate

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893