Go to  Advanced Search

The alkaline sodium sulphide leaching of enargite

Show simple item record

dc.contributor.author Parada Torres, Fernando Andrés
dc.date.accessioned 2011-04-27T14:55:47Z
dc.date.available 2011-04-27T14:55:47Z
dc.date.copyright 2011 en
dc.date.issued 2011-04-27T14:55:47Z
dc.identifier.uri http://hdl.handle.net/2429/34016
dc.description.abstract Leaching of enargite samples containing approximately 12 % As, 0.5 % Sb and 38 % Cu was studied in alkaline sodium sulphide solutions. Samples were leached in the presence of sodium hydroxide and sodium sulphide, which is expected to hydrolyse and form sodium hydrosulphide. Kinetic parameters studied included temperature, particle size, reagent concentration and stoichiometry in high pulp density tests. Leaching behaviour of arsenic and antimony was very similar; it was enhanced as temperature and reagent dosage was increased and/or particle size decreased. Copper, iron, zinc, and silver were not extracted during the leaching procedure. Through chemical analysis, X-Ray Diffraction and Scanning Electron Microscopy leach solutions and residues were characterised. Arsenic and antimony were efficiently removed, leaving copper-sulphur compounds such as digenite, bornite and sodium copper sulphide (NaCu₅S₃). Some of the leaching results differ from those found in the literature, especially in regards to the nature of the solid residue and the leaching reaction given. Removal of arsenic from solution was analysed by acidification and crystallization. Acidification removed arsenic and antimony from solution to produce a mixture of oxides and sulphides; however, sulphide was removed from solution most likely as hydrogen sulphide, which would need to be scrubbed in a sodium hydroxide solution. Finally acid consumptions over arsenic plus antimony ratios were too large for a practical application. Crystallization on the other hand is a simpler alternative. The main requirement is to have high concentrations of arsenic and antimony in solution. In this case part of the arsenic and antimony would be recirculated to the leaching stage. Other aspects included behaviour of chalcopyrite and pyrite in alkaline solutions and the possibility of producing sulphide ions in situ. Unfortunately no considerable amounts of aqueous sulphide were produced. Also, the behaviour of arsenic and antimony (III) in sodium sulphide alkaline solutions was analysed using arsenic and antimony trioxide. These results are in an early phase of study and could be a relevant topic for further research. In both cases a black precipitate formed containing elemental antimony and oxides. However, no crystallization of thio-compounds seemed to have occurred. en
dc.language.iso eng en
dc.publisher University of British Columbia en
dc.rights Attribution-NonCommercial 2.5 Canada *
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/ *
dc.title The alkaline sodium sulphide leaching of enargite en
dc.type Electronic Thesis or Dissertation en
dc.degree.name Master of Applied Science - MASc en
dc.degree.discipline Materials Engineering en
dc.degree.grantor University of British Columbia en
dc.date.graduation 2011-05 en
dc.degree.campus UBCV en
dc.description.scholarlevel Graduate en


Files in this item

Files Size Format Description   View
ubc_2011_spring_parada_fernando.pdf 15.85Mb Adobe Portable Document Format   View/Open
 

This item appears in the following Collection(s)

Show simple item record

All items in cIRcle are protected by copyright, with all rights reserved.

Attribution-NonCommercial 2.5 Canada Except where otherwise noted, this item's license is described as Attribution-NonCommercial 2.5 Canada

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893