Go to  Advanced Search

Investigation of repeatability of sol-gel iridium oxide pH sensor on flexible substrate

Show full item record

Files in this item

Files Size Format Description   View
Chiao_SPIE_7269_726916-7.pdf 483.1Kb Adobe Portable Document Format   View/Open
 
Title: Investigation of repeatability of sol-gel iridium oxide pH sensor on flexible substrate
Author: Huang, Wen-Ding; Hsu, Lun-Chen; Wang, Jianqun; Ativanichayaphong, Thermpon; Deb, Sanchali; Chiao, Mu; Chiao, J. C.
Subject Keywords miniature pH sensor, sol-gel process, linearity, decay time, environmental parameter control, potential stability
Issue Date: 2008
Publicly Available in cIRcle 2011-11-09
Publisher Society of Photo-Optical Instrumentation Engineers
Citation: Wen-Ding Huang, Lun-Chen Hsu, Jianqun Wang, Thermpon Ativanichayaphong, Sanchali Deb, Mu Chiao and J. C. Chiao, "Investigation of repeatability of sol-gel iridium oxide pH sensor on flexible substrate", Proc. SPIE 7269, 726916 (2008); doi:10.1117/12.810675
Abstract: In this paper, we presented the fabrication process of miniature pH sensor arrays on flexible polymer substrates. The repeatability of the sensors based on sol-gel fabrication processes was investigated. The sensor repeatability was characterized with linearity, decay time, environmental parameter control and potential stability. Similar linear responses were found in different batches of sensor arrays. Near super- Nernstian responses were measured on each sensor with slope ranges from -71.6 to -110 mV/pH within a pH range between 2 and 12. The response times were compared in different batches. Six to twenty five seconds of average decay time were shown in each sample repeatedly. Three sensors showed the close potential response in different volumes of pH buffer solution. The sensor showed good stability in each step of the titration process between pH values of 1.8 and 11.9. The peak and saturated potential values presented high correlation with pH values with minor noises. The results showed good sensitivity, stability and repeatability using the sol-gel processes for iridium-oxide pH sensors on flexible substrates. Copyright 2009 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. Copyright 2008 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.
Affiliation: Mechanical Engineering, Dept of
URI: http://hdl.handle.net/2429/38904
Peer Review Status: Reviewed
Scholarly Level: Faculty

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893