Go to  Advanced Search

Ultrafast microfluidic drop sorter

Show full item record

Files in this item

Files Size Format Description   View
Mulholland_B_et_al_APSC_459_2011.pdf 5.912Mb Adobe Portable Document Format   View/Open
 
Title: Ultrafast microfluidic drop sorter
Author: Mulholland, Brendan; Da Costa, Daniel; Eldridge, Dale
Issue Date: 2011-04-04
Publicly Available in cIRcle 2011-11-28
Series/Report no. University of British Columbia. Engineering Projects Project Lab. APSC 459, Project Conclusion Reports, 2011
Abstract: This project sought to design, implement and test a high-throughput fluorescence measurement system capable of measuring the fluorescence of picolitre-volume aqueous droplets. Additionally, it is desired to sort these droplets into one of two populations based on the measured fluorescent intensity each individual droplet. While full implementation of this last objective was placed outside the scope of this project, research was conducted in order to direct future work. Ultimately, the system is intended to become a versatile tool that will be useful for a wide variety of applications in biology and biochemistry. An optical system capable of measuring fluorescent emission from two distinct fluorescent dyes (specifically, fluorescein and Quasar 670, or equivalent) was designed. Optical and mechanical components were specified, sourced and ordered. LabVIEW software was developed to preview and record data collected from the system. MATLAB scripts were written to perform analysis of this data. A microfluidic droplet sorting device described in a 2010 PNAS publication by Agresti et al. was replicated. Droplet-generating microfluidic devices were designed, fabricated and demonstrated to function as expected. Measurement sensitivity (particularly to fluorescein), speed and robustness were identified as the critical indicators of system performance, and have been investigated in detail. The sensitivity limit was determined to lie in the range 10 – 30 nM, the system was verified to be capable of measuring droplet fluorescence at droplets flow rates of at least 649 droplets per second and the system was demonstrated to make and record fluorescent measurement data continuously for almost 4 hours. In order to physically sort droplets, it was determined that a high-voltage (~1kV), high-speed (1-20kHz) amplification circuit was required. Research was conducted into the feasibility of constructing a custom amplification circuit. It was determined that, while possible, this is a non-trivial design task which would require significant expertise and time commitment. Alternatives were investigated and it was determined that suitable commercial solutions are readily available, with the lowest end models starting at approximately $3000.
Affiliation: Engineering Physics, Dept of
URI: http://hdl.handle.net/2429/39331
Peer Review Status: Unreviewed
Scholarly Level: Undergraduate

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893