Go to  Advanced Search

Please note that cIRcle is currently being upgraded to DSpace v5.1. The upgrade means that the cIRcle service will not be accepting new material from 05:00 on September 1/15 until 08:00 on September 4/15. Read only access will be available during this period. Apologies for the inconvenience.

Physical and computational models of Marangoni and buoyancy flow during dissolution

Show full item record

Files in this item

Files Size Format Description   View
ubc_2012_fall_chatterjee_aniruddha.pdf 4.819Mb Adobe Portable Document Format   View/Open
Title: Physical and computational models of Marangoni and buoyancy flow during dissolution
Author: Chatterjee, Aniruddha
Degree Master of Applied Science - MASc
Program Materials Engineering
Copyright Date: 2012
Publicly Available in cIRcle 2012-09-04
Abstract: During the production of titanium products, the presence of aluminum-rich regions can cause Type II alpha stabilized defects which are deleterious to down-stream performance. Al-rich material can enter the melt via ballistic transfer from the melting hearth at various stages during electron beam cold hearth re-melting (EBCHR) of Ti-6Al-4V (Ti-6wt%Al-4wt%V) alloy. If this material is not fully dissolved and homogenized when solidification occurs, the ingot will contain Al-rich regions. Thus, in order to produce high-performance components for aerospace applications, titanium producers must understand the dissolution process for alloying elements entering the melt. To study and characterize the phenomena associated with the dissolution and homogenization of alloying elements during EBCHR processing of Ti-6Al-4V, a water-ethanol physical analogue model has been developed to simulate the thermal, compositional and fluid flow behavior that are active in the dissolution process. The physical model consists of a hot water solvent contained in a transparent cell (beaker) in which solidified ethanol or ice solute is dipped. The data generated from the physical model was used to validate a coupled thermal- fluid flow-composition model (developed in the commercial CFD code ANSYS CFX). The analogue model focuses on characterizing the effects of thermal and compositional variations on surface tension driven fluid flow (Marangoni flow) and buoyancy driven flow during the dissolution of a low density, low surface tension and low melting point solid material (frozen ethanol) in a high density, high surface tension and high melting point liquid (water), which was found to be analogous to the dissolution of solid Al in liquid Ti. In addition, the analogue model was also capable to predict the dissolution behavior when there was no compositional difference between the solute and the solvent. Based on a comparison of fluid flow pattern and interface shape, and temperature data obtained at discrete locations in the experimental and computational results, the numerical model has been shown to quantitatively and qualitatively predict the dissolution behavior observed in the physical process.
URI: http://hdl.handle.net/2429/43172
Scholarly Level: Graduate

This item appears in the following Collection(s)

Show full item record

All items in cIRcle are protected by copyright, with all rights reserved.

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893