Go to  Advanced Search

Hydrogen generation in a multi-channel membrane reactor

Show simple item record

dc.contributor.author Vigneault, Alexandre
dc.date.accessioned 2012-10-23T13:46:51Z
dc.date.available 2013-01-30
dc.date.copyright 2012 en_US
dc.date.issued 2012-10-23
dc.identifier.uri http://hdl.handle.net/2429/43522
dc.description.abstract A novel Multi-Channel Membrane Reactor (MCMR) has been developed for the decentralized production of hydrogen via Steam Methane Reforming (SMR). The concept alternates steam reforming gas channels to produce the hydrogen and Methane Catalytic Combustion (MCC) gas channels to provide the heat of reaction. A palladium-silver (Pd/Ag) membrane inside each reforming gas channel shifts the reaction equilibrium, and produces pure hydrogen in a single vessel. A steady-state, non iso-thermal and two-dimensional modeling of the concept was first developed. Sensitivity analyses from the simulations indicated the importance of fast kinetics and thick catalyst coating layers (>80 mm) to avoid limitations from the catalyst. An innovative hot substrate air-spray coating method was developed, and thick layer of catalysts (>240 µm) with good adherence under sonication were obtained. A lab-made Ru MgO-La₂O₃/ y-Al₂O₃ catalyst, with carrier and promoters pre-aged by steam, and coated on pre-oxidized Fecralloy, was found to be suitable for the reforming channel. On the combustion side, commercial Pd y-Al₂O₃ catalysts were successfully coated on stainless steel support. Kinetics parameters were estimated for both reforming and combustion catalysts. A proof-of-concept MCMR was designed and built. Results showed that a methane conversion of 87% was achievable with a pure hydrogen output (99.995%). The reforming experimental results were adequately predicted for a wide range of operating conditions. On the combustion side, the experimental conversions were below the model expectations, likely because of flow distribution and catalyst stability issues. It is shown that the MCMR concept has the potential to give hydrogen yield per reactor volume, and per mass of catalyst, about one order of magnitude higher than for alternate membrane reactor technologies. en_US
dc.language.iso eng en_US
dc.publisher University of British Columbia en
dc.rights Attribution-NonCommercial 2.5 Canada *
dc.rights.uri http://creativecommons.org/licenses/by-sa/3.0/ *
dc.title Hydrogen generation in a multi-channel membrane reactor en_US
dc.type Electronic Thesis or Dissertation en
dc.degree.name Doctor of Philosophy - PhD en_US
dc.degree.discipline Chemical and Biological Engineering en_US
dc.degree.grantor University of British Columbia en
dc.date.graduation 2012-11 en_US
dc.degree.campus UBCV en_US
dc.description.scholarlevel Graduate en

Files in this item

Files Size Format Description   View
ubc_2012_fall_vigneault_alexandre.pdf 37.59Mb Adobe Portable Document Format   View/Open

This item appears in the following Collection(s)

Show simple item record

All items in cIRcle are protected by copyright, with all rights reserved.

Attribution-NonCommercial 2.5 Canada Except where otherwise noted, this item's license is described as Attribution-NonCommercial 2.5 Canada

UBC Library
1961 East Mall
Vancouver, B.C.
Canada V6T 1Z1
Tel: 604-822-6375
Fax: 604-822-3893