- Library Home /
- Search Collections /
- Open Collections /
- Browse Collections /
- UBC Undergraduate Research /
- Flow Modeling of a Syncrude North East In-Pit Hummock...
Open Collections
UBC Undergraduate Research
Flow Modeling of a Syncrude North East In-Pit Hummock for the Sandhill Fen in Fort McMurray, Alberta Preston, Ryan
Abstract
The groundwater flow of a reclamation site in Alberta’s Oil Sands was modeled using the MODFLOW 3D code. The site was simulated to determine the flow characteristics of a reclamation hummock. Such hummocks are required to maintain a mounded water table to sustain plant life placed on top as a part of reclamation. Sensitivity analysis was conducted initially by varying the water table depth. The hydraulic conductivity of the material, and recharge were then varied, in addition to adding a low conductivity cover layer, in order to monitor the water table response. Modeling found that a lower than predicted hydraulic conductivity value would be required to maintain a desired mounded water table at 1.5m depth. Additionally the hummock was found to be sensitive to flooding and drought conditions. Design topography such as swales and ridges were found to function as desired, by acting as areas of discharge and recharge respectively.
Item Metadata
Title |
Flow Modeling of a Syncrude North East In-Pit Hummock for the Sandhill Fen in Fort McMurray, Alberta
|
Creator | |
Date Issued |
2009-04-14
|
Description |
The groundwater flow of a reclamation site in Alberta’s Oil Sands was modeled using the MODFLOW 3D
code. The site was simulated to determine the flow characteristics of a reclamation hummock. Such
hummocks are required to maintain a mounded water table to sustain plant life placed on top as a part
of reclamation. Sensitivity analysis was conducted initially by varying the water table depth. The
hydraulic conductivity of the material, and recharge were then varied, in addition to adding a low
conductivity cover layer, in order to monitor the water table response. Modeling found that a lower
than predicted hydraulic conductivity value would be required to maintain a desired mounded water
table at 1.5m depth. Additionally the hummock was found to be sensitive to flooding and drought
conditions. Design topography such as swales and ridges were found to function as desired, by acting as
areas of discharge and recharge respectively.
|
Extent |
2049383 bytes
|
Genre | |
Type | |
File Format |
application/pdf
|
Language |
eng
|
Series | |
Date Available |
2009-04-14
|
Provider |
Vancouver : University of British Columbia Library
|
Rights |
Attribution-NonCommercial-NoDerivatives 4.0 International
|
DOI |
10.14288/1.0053583
|
URI | |
Affiliation | |
Campus | |
Citation |
Preston, Ryan. 2009. Flow Modeling of a Syncrude North East In-Pit Hummock for the Sandhill Fen in Fort McMurray, Alberta. Undergraduate Honours Thesis. Department of Earth and Ocean Sciences. University of British Columbia.
|
Peer Review Status |
Unreviewed
|
Scholarly Level |
Undergraduate
|
Copyright Holder |
Preston, Ryan
|
Rights URI | |
Aggregated Source Repository |
DSpace
|
Item Media
Item Citations and Data
Rights
Attribution-NonCommercial-NoDerivatives 4.0 International