Open Collections

The hydraulic potential of high iron bearing steel slags

University of British Columbia

The incorporation of additives to the clinker or to the raw materials stream is a common practice in cement manufacture. However, steel slag, unlike its ironmaking parent the blast furnace slag, it is not a conventional admixture for cement. Currently most steel slags are slow cooled rendering stable crystalline compounds with minor hydraulic value. Nevertheless, if steel slags would be quenched and granulated, the resulting glassy product might display increased hydration and strength development potential. The use of steel slag in cement could contribute to important savings for both cement and steelmaking industries and provide a solution for the environmental problems linked to CO₂ emissions and costs of transport and disposal. The purpose of this research is to explore the thermodynamics and kinetics of steel slag hydration in an effort to produce a cement additive, or a more promising material of near Portland cement composition. An important criteria used in the assessment of slags as potential cements is the presence of a glassy phase. At present, it is not very clear why glass enhances the hydration process. However, it is known that the free energy of formation for glasses is less than for crystals so that glasses are easier to hydrate compared to crystalline materials. In the particular case of steel slag, the glassy phase would have to contain high amounts of iron. Steel slags are known to display iron levels approximately 10 times higher than Portland cement and commonly used blast furnace slags. However, the effect of high Fe₂0₃ levels on the setting and strengthening of cement paste is not clearly understood due to the fact that most cement additives do not present this characteristic. The present work looks at the progress made in recycling steel slag as cement additive, the complexity of the hydration process in slags, the possibilities of improving the hydration potential of slags at laboratory and industrial level, and the problems that still need to be addressed. However, the focus is on the glassy phase present in quenched steel slag and its influence on the hydration rate. B-SEM, Image Analysis, XRD techniques and a series of isothermal calorimetric experiments on synthetic as well as oxidized industrial steel slags vis-avis Portland cement assist in this endeavor. Temperature is a thermodynamic and kinetic factor modifying the enthalpy of hydrate formation (heat of hydration) and accelerating the hydration reaction. Hydration tests were carried out at temperatures ranging from 25 to 70 °C to determine the heat release, the rate of reaction and the apparent activation energy for steel slag and Portland cement hydration. The kinetics of hydration were explored in synthetic steel slags in both amorphous and fully crystalline form. The mechanism of hydration for both amorphous and crystalline steel slag was found to be a combination of nucleation and growth and diffusion, with higher reaction rates for the glassy slags. The higher reactivity in the glassy slags was explained by a lower activation energy when compared to the crystalline parent. Also, it was confirmed that slags have higher activation energies than Portland cement. As expected, and comparably to granulated blast furnace slags, quenched steels slags exhibited a significant hydraulic potential and hydrated at longer times, thus being expected to contribute to the late (> 5-180 days) strength development in slag - cements with compression strength superior to pure Portland cement.

Thesis/Dissertation

application/pdf

2009-07-02

For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

http://hdl.handle.net/2429/9993

Materials Engineering

University of British Columbia

UBCV

DSpace